A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Full impact assessment covers track, brackets, and any panel damage from the same event.
Whatever brought you here, one of these service lines is the fix, and one call gets a technician moving.
We realign horizontal and vertical track sections together, since a shift in one usually affects the other.
A replaced section restores the correct roller path immediately, without the recurring wear a straightened section can develop.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
From a vehicle backing into the door to storm debris impact, we assess and repair track, brackets, and any related panel damage.
Loose or cracked wall brackets let the track shift under normal operation. We reinforce or replace mounting hardware as part of the repair.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Technicians carry standard track sections and mounting hardware for common configurations.
A full inspection prevents a quick patch that fails again within weeks.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Appreciated that they checked the wall brackets too, not just the visible bent section.”
A combination of a worn roller and slightly bent track is one of the most common causes we see.
This is a job for a trained technician given the tension and alignment involved.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
Pricing varies with the extent of the damage, quoted upfront before any repair begins.
It's best to leave the door as-is and call for repair rather than risk worsening the damage.
A straightforward realignment often takes under an hour; a full section replacement may take a bit longer.
Licensed technicians, flat-rate pricing, and a truck stocked for this exact job.
☎ Call +1-831-293-1591From one side of Shawnee to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Shawnee, KS